TAK Enterprises - Wire Straighteners, Cut-to-Length Machines, Linear Feeders, Wire Payoffs

Cut to Length Machines

Medical Guidewire Arbor Cut To Length System  
Friday, September 14, 2012
This system has been designed to process medical guide wires from bulk coil to precise cut lengths. The belt type drive will not mark or damage the wire surface, and the quill-on-quill shearing tools provide a square, burr free cut.
Abrasive Wheel Servo Controlled Feed and Cut To Length System 
Thursday, March 12, 2015
This System incorporates a Programmable Abrasive Wheel Cutting Station, Feed Drive and Precision Wire Straightener to cut tubing with minimal ID/OD distortion
High Speed Continuous Cutter 
Wednesday, December 24, 2014

High Speed Continuous Cutter

#2 SFC Short Stroke Pneumatic System 
Thursday, August 01, 2013
This Standard TAK #2 SFC has been designed for short feed stroke capabilities down to .005"
#2 PCS Precision Cutting Station 
Wednesday, June 12, 2013
Manually fed wire and thin/narrow strip cut to length for high quality, square, burr free cuts
Programmable Rotary Wire Straightener with Collection System 
Wednesday, June 12, 2013
Programmable Rotary Wire Straightener equipped with on-the-fly cutting system and batching collection tray
Tube Shearing System 
Wednesday, June 12, 2013
The TAK Tube Shearing System is designed to shear cut small diameter thin wall tubing without collapsing the cut ends
Cut To Length System With Batching Conveyor 
Tuesday, October 16, 2012
Pneumatic Cut To Length System With Batching Conveyor
"On the Fly" Cutting Machines 
Thursday, July 28, 2011
Cutting Foil Strips 
Thursday, July 28, 2011
.125" dia Hinge Pins @ .500" lengths 
Thursday, July 28, 2011
Model 4L Pneumatic Straighten, Feed and Cut-To-Length System processing full hard stainless steel hinge pins
#4H PCS Precision Cutting Station  
Wednesday, July 14, 2010
A pneumatic precision shear cutting station for manually fed blanks. Utilizes precision caliper scale and bolt action feed stop to maintain accurate cut lengths.
#2 Feed and Cut High Speed 
Wednesday, July 14, 2010
Pneumatic Feed, Straighten and Cut-To-Length System processing .060 diameter sliver wire used in electrical contact production. System is processing .125" long cut blanks at 250 spm with repeatable cut lengths
#2 Feed and Cut Running 2 Wires 
Wednesday, July 14, 2010
A high output demand required a pneumatic feed and cut to length system that could deliver more than 300 .125" long x .060" wire blanks per minute.
Tie Wire Production System 
Wednesday, July 14, 2010
A pneumatic feed, straighten and cut-to-length system designed to process tie wires from bulk coil.
Wire Feed and Cut System with Enclosure  
Wednesday, July 14, 2010
This TAK Pneumatic WIre Feed and Cut -to-Length system is monted on a steel table with an optional sound attenuating enclosure
Pneumatic Feed and Cut Systems 
Wednesday, July 14, 2010
Standard TAK #2 Precision Pneumatic Wire and Thin Strip feed and cut-to-length system